Product overview: Fluke 700HTP-2 Hydraulic Test Pump
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.
Ideal for calibration when connected to a Fluke high pressure module via the reference port. The 700HTP-2 uses distilled water or mineral-based hydraulic oil as a source for calibration of high pressure input devices such as pressure transmitters or pressure gauges. Can also be used with Fluke 717 pressure calibrators.
Key features
Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
Integral pressure adjustment vernier knob for fine pressure adjustment
Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
Compatible with optional Fluke-700PRV pressure relief valve designed to protect pressure modules from overpressure damage
Improved priming
Improved stroke limiting mechanism
Note: The user must provide a hose with appropriate end fittings to apply pressure from the UUT port to the calibration unit under test such as the Fluke-700HTH-1 hose kit.
|
Specifications: Fluke 700HTP-2
Hydraulic Test Pump |
|
|
Mechanical and General Specifications |
|
|
Size (L x W x D) |
9.5 x 6.1 x 2.6 in (241 x 155 x 66
mm) |
|
Weight |
1.29 lb (.58 kg) |
|
Warranty |
One year |
|
Material |
Wetted materials: 303 stainless
steel, aluminum, polyurethane, PTFE, nitrile, and nylon |
Models: Fluke 700HTP-2 Hydraulic Test Pump
Fluke 700HTP 2
Hydraulic Test Pump
¼ inch NPT to ¼ inch NPT adapter to connect the reference gauge port on the pump body to the
1/4 NPT female fitting on Fluke 700P29, P30, and P31 pressure modules.
(2) ¼ inch NPT male to ¼ inch BSP Female adapters
¼ inch NPT Tee (installed)
Instruction sheet
